Φ180mm Metal Pipe Welding & Corrugating Line1.Usage
1.Usage
This line is mainly use for metal sheathing on high voltage cable.
This production line is mainly used in the production of high-voltage cable metal sheath. The clean metal belt after side shearing through special forming die continuous welding by inert gas and then corrugation.
2.Main Technical Specification
2.1Welded Pipe diameter Φ40～Φ180mm
2.2Welded metal material copper tape, Al tape and Stainless Steel tape
2.3 Tape thickness CU:0.3mm～1.2mm AL:1.0mm～4.0mm SS:0.3mm～1.0mm
2.4Max welding speed 8m/min
2.5Welding current 5～350A
2.6Max Corrugated speed 800rpm
2.7Corrugated pitch 8mm～40mm
2.8Corrugated depth 1mm～5mm
2.9Corrugated type spiral, ring
2.10Max pulling force 3000kg
2.11Caterpillar motor power 11KW(Ac frequency conversion )
2.12Corrugation motor power 11KW(Ac servo )
2.13Welding protection gas argon gas or helium gas
2.14Protection gas argon gas 50-80L/H
2.15Working gas pressure ＞0.4Mpa
2.16Central height 1000mm
2.17Installed capacity ＜100KVA
3.Components
| 3.1Φ3600 portal type pay off | 1 set |
| 3.2Driving tape pay off | 1 set |
| 3.3Tape Pay off tension speed control device | 1 set |
| 3.4Tape connecting machine | 1 set |
| 3.5Welding platform | 1 set |
| 3.6Inlet Tape positioning device | 1 set |
| 3.7Precision Cutter device | 1 set |
| 3.8Outlet tape positioning device and tape straightening device | 1 set |
| 3.9Waste edge collecting device | 1 set |
| 3.10Precisiong wheel type forming device | 1 set |
| 3.11Welding die stand and sizing device | 1 set |
| 3.12Straight shank welding gun | 1 set |
| 3.13Circle Cooling system Welding gun | 1 set |
| 3.14Three-dimensional adjust device for gun | 1 set |
| 3.15Welding arc monitoring device | 1 set |
| 3.16Argon arc Welding machine | 1 set |
| 3.17Air supply adjust system | 1 set |
| 3.18Lubrication | cooling and blow device for welding , 1 set |
| 3.193000kg flat belt caterpillar | 1 set |
| 3.20Eccentric type corrugation device , 1 set | 1 set |
| 3.21Lubrication cooling device for corrugation | |
| 3.22Cleaning and blow system | 1 set |
| 3.23Φ3600 portal type take up with traverse | 1 set |
| 3.24Electrical control system | 1 set |
- 4.Other
- Machine direction: From Left to Right,face to machine, left is pay off and right is take up.
- Color code: main machine(RAL5015),rotating parts(RAL2004),electrical cabinet(RAL7032).
Supply 2 set of die
Machine Drawing
|
|
Φ180mm Metal Pipe Welding & Corrugating Line Images
|
